Hyundai Ioniq: Audio / Audio Unit. Repair procedures
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the cluster fascia panal. (Refer to Body - "Center Fascia Panal") |
3. | Remove the crash pad garnish RH. (Refer to Body - "Crash Pad Garnish") |
4. | Remove the audio assembly (A) after loosening mounting screws. |
5. | Remove the audio head unit after disconnecting the connectors and cable (A). |
1. | Connect the audio unit connectors and cable. |
2. | Install the audio head unit. |
3. | Install the crash pad garnish RH. |
4. | Install the cluster fascia panal. |
5. | Connect the negative (-) battery terminal. •
| Make sure the connector are connected in properly. |
•
| Check the audio system. |
|
|
Components[RADIO/CD/MP3]Connector Pin Information
No
Connector A
Connector B
1Rear speaker (LH +)-2Rear speaker (LH -)Mic (+)3--4--5-Antenna power6Camera powerIllumination (+)7Camera vidio inputMM CAN (+)8--9--10-Battery (+)11DTCBattery (+)12Steering key signalGround13Front speaker (LH +)Ground14Front speaker (LH -)-15Front speaker (RH -)Mic (-)16Front speaker (RH +)-17--18- -19-Illumination (-)20Camera power groundMM CAN (-)21Camera video ground-22-ACC23--24--25--26Steering key ground-27Rear speaker (RH -)-28Rear speaker (RH +)-29--30--31-IGN 332Camera(NC...
Inspection1.Troubleshooting for Speaker(1)Basic inspection of speakerInspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector is connected precisely to remove vibration transmitted from body trims and surrounding parts...
Other information:
Removal
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries...
Replacement1.Remove the rear door window glass.(Refer to Rear Door - "Rear Door Window Glass")2.Remove the rear door outside handle.(Refer to Rear Door - "Rear Door Outside Handle")3.Loosen the rear door outside handle base mounting bolt (A). Tightening torque : 2...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment
read more