Hyundai Ioniq: High Voltage Battery Control System / Battery Current Sensor. Description and operation
Hyundai Ioniq (AE) 2017-2024 Service Manual / Hybrid Control System / High Voltage Battery Control System / Battery Current Sensor. Description and operation
| Description |
Battery Current Sensor is integrated into the Power Relay Assembly (PRA) and measures the current of the high voltage battery during charging or discharging.
Pre-Charge Resistor. Repair procedures
Removal1.Shut off the high voltage.(Refer to Hybrid Control System - "High Voltage Shut-off Procedures")2.Remove the rear seat cushion.(Refer to Body - "Rear Seat Assembly")3...
Other information:
Hyundai Ioniq (AE) 2017-2024 Service Manual: Components and components location
C..
Hyundai Ioniq (AE) 2017-2024 Service Manual: Smart Key. Repair procedures
Smart KeySmart Key Code Saving1.Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.2.Select the vehicle model and then do "Smart Key Code Saving".3.After selecting "Smart Key Teaching" menu, push "Enter" key, then the screen will be shown as below...
Categories
- Manuals Home
- 1st Generation Ioniq Owners Manual
- 1st Generation Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Hybrid battery SOC (State of Charge) gauge
- Jump Starting
- New on site
- Most important about car
Manual adjustment
The front seat can be adjusted by using the levers located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.
Forward and rearward adjustment
Copyright © 2024 www.hioniqae.com