Hyundai Ioniq: Additional Seat Belt Safety Precautions / Care of Seat Belts

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Safety system of your vehicle / Additional Seat Belt Safety Precautions / Care of Seat Belts

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.

Periodic inspection

All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible by an authorized HYUNDAI dealer.

Keep belts clean and dry

Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.

When to replace seat belts

The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized HYUNDAI dealer.

Additional Seat Belt Safety Precautions

Seat belt use during pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt...

Child restraint system (CRS)

Children Always in the Rear WARNING Always properly restrain children in the rear seats of the vehicle. Children of all ages are safer when restrained in the rear seat...

Other information:

Hyundai Ioniq (AE) 2017-2025 Service Manual: Piston and Connecting Rod. Repair procedures

Disassembly • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries...

Hyundai Ioniq (AE) 2017-2025 Service Manual: BJ Boot. Repair procedures

Replacement1.Remove the front driveshaft. (Refer to Driveshaft Assembly - "Front Driveshaft")2.Remove the TJ joint assembly. (Refer to Driveshaft Assembly - "TJ Joint")3.Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A). 4.Using the SST, secure the BJ boot bands...