Hyundai Ioniq: Cylinder Head Assembly / Cylinder Head Cover. Components and components location

1. Cylinder head cover 2. Cylider head cover gasket
| 3. Camshaft position sensor
|
Components1. Camshaft bearing cap2. Front camshaft bearing cap3. Exhaust camshaft4. Intake camshaft5. Exhaust CVVT assembly6. Intake CVVT assembly7. Cylinder head assembly8...
Removal
•
Use fender covers to avoid damaging painted surfaces. •
To avoid damage, unplug the wiring connectors carefully while holding the connector portion...
Other information:
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower motor level control, mix mode control and in-car humidity control...
DescriptionThe multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3 etc., through the vehicle's sound system when it is linked to this jack. The customer has this added option.In case of distortions from media connected to the AUX source, the audio unit may not be defective but the output level of the used media does not match the specification of the AUX input...
Categories
Seat belt warning light

As a reminder to the driver, the seat belt warning light will illuminate and
warning chime will sound for approximately 6 seconds each time you place the Engine
Start/Stop button to the ON position if the seat belt is unfastened.
read more