Hyundai Ioniq: Convenient features of your vehicle / Driver Position Memory System

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Convenient features of your vehicle / Driver Position Memory System

Hyundai Ioniq. Driver Position Memory System

The Driver Position Memory System is provided to store and recall the following memory settings with a simple button operation.

- Driver's seat position
- Side view mirror position
- Instrument panel illumination intensity

If the battery is disconnected, the position memory will be lost and the driving positions must be stored in the system again.

If the Driver Position Memory System does not operate normally, have the system checked by an authorized HYUNDAI dealer.

WARNING

Never attempt to operate the driver position memory system while the vehicle is moving.

This could result in loss of control, and an accident causing death, serious injury, or property damage.

Storing Positions into Memory

1. Check that the shift lever is in P (Park) while the Engine Start/Stop button is in the ON position.

2. Adjust the driver's seat position, side view mirror position and instrument panel illumination intensity to positions comfortable for the driver.

3. Press the SET button. The system will beep once and notify you "Press button to save settings"on the LCD display.

4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has been successfully stored.

5. "Driver 1 (or 2) settings saved" will appear on the LCD display.

Recalling Positions from Memory

1. Check that the shift lever is in P (Park) while the Engine Start/Stop button is in the ON position.

2. Press the desired memory button (1 or 2). The system will beep once, and then the driver's seat position, side view mirror position and instrument panel illumination intensity will automatically adjust to the stored positions.

3. "Driver 1(or 2) settings is applied" will appear on the LCD display.

NOTICE

  • While recalling the "1" memory position, pressing the SET or 1 button temporarily stops the adjustment of the recalled memory position. Pressing the 2 button recalls the "2" memory position.
  • While recalling the "2" memory position, pressing the SET or 2 button temporarily stops the adjustment of the recalled memory position. Pressing the 1 button recalls the "1" memory position.
  • While recalling the stored positions, pressing one of the control buttons for the driver’s seat, side view mirror or instrument panel illumination will cause the movement of that component to stop and move in the direction that the control button is pressed.

Theft-alarm System

This system helps to protect your vehicle and valuables. The horn will sound and the hazard warning lights will blink continuously if any of the following occur: - A door is opened without using the smart key...

Easy Access Function

The system will move the driver's seat automatically as follows: The shift lever is in P (Park) It will move the driver's seat rearward when the Engine Start/Stop button is in the OFF position and the driver's door is opened...

Other information:

Hyundai Ioniq (AE) 2017-2025 Service Manual: Fuel Pressure Sensor (FPS). Description and operation


DescriptionThe fuel pressure sensor (FPS) is installed on the top of the low pressure fuel pump and measures the pressure in the low pressure fuel line.Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the low pressure fuel pump...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Rear Lower Arm. Repair procedures


Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)    • Be careful not to damage the hub bolts when removing the rear wheel and tire (A)...

Categories

Seat Belt Warning Light

Seat belt warning light

Hyundai Ioniq. Seat Belt Warning Light

As a reminder to the driver, the seat belt warning light will illuminate and warning chime will sound for approximately 6 seconds each time you place the Engine Start/Stop button to the ON position if the seat belt is unfastened.

read more


 
Copyright © 2025 www.hioniqae.com