| Replacement |
Put on gloves to prevent hand injuries. |
| 1. | Remove the inside rear view mirror cover (A).
|
| 2. | Disconnect the ECM mirror connector (A).
|
| 3. | Loosen the mounted screws and push the ECM mirror base upward to remove the ECM mirror assembly (A).
|
| 4. | To install, reverse the removal procedure.
|
Component Location 1. Inside rear view mirror
DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower moto
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.