RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.
Specification Item Specification Ultrasonic sensorVoltage ratingDC 12VDetecting range30 - 120cmOperation voltageDC 9 - 16VOperation currentMAX 350mAOperation temperature-30°C to +75°C (22°F to +167°F)Operation frequency48 ± 5KHzNumber of sensors8EA
DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper