Inspection |
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the driver door trim. (Refer to Body - "Front Door Trim") |
3. | Disconnect the power mirror switch connector from the door trim. |
4. | Check for continuity between the terminals in each switch position as shown below. [Driver Auto Down Power Window Switch] [Driver Safety Power Window (Driver Auto)] [Front Safety Power Window (Front Auto)] [Power Door Lock Switch Inspection] [Power Window Lock Switch Inspection] |
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the assist door trim. (Refer to Body - "Front Door Trim") |
3. | Disconnect the power mirror switch connector from the door trim. |
4. | Check for continuity between the terminals in each switch position as shown below. |
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the rear door trim. (Refer to Body - "Rear Door Trim") |
3. | Disconnect the power mirror switch connector from the door trim. |
4. | Check for continuity between the terminals in each switch position as shown below. [Rear Power Window Switch Inspection] [Rear Sear Heater Switch Inspection] |
Removal |
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front door trim. (Refer to Body - "Front Door Trim") |
3. | Remove the power window switch (A). |
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the rear door trim. (Refer to Body - "Rear Door Trim") |
3. | Remove the power window switch assembly after disengaging the mounting clips. |
Installation |
1. | Install the power window switch assembly. |
2. | Install the front door trim after connect the connector. |
1. | Install the power window switch assembly. |
2. | Install the rear power window switch. |
1. Door lock/unlock button
2. Driver position memory system
3. Side view mirror control switch
4. Central door lock switch