| Replacement |
| 1. | Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") |
| 2. | After loosening the mounting screws, remove the drip rail assembly (A).
|
| 3. | After loosening the mounting screws, disengage the rear drip (A).
|
| 4. | Remove the stopper (A) by pushing it in the direction of the arrow.
|
| 5. | Remove the sunroof sunshade (A) by pushing it backward.
|
| 6. | To install, reverse the removal procedure. |
Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Replacement1.Remove the sunroof assembly.(Refer to Sunroof - "Sunroof Assembly") 2.Remove the sunroof sunshade.(Refer to Sunroof - "Sunroof Sunshade") 3.
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.
DescriptionRear view monitor (RVM) will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.This system is a supplemental system that shows behind the vehicle through the AV monitor while backing-up. • This system is a supplementary function only.