Hyundai Ioniq: VESS(Virtual Engine Sound System) / Virtual Engine Sound Speaker. Repair procedures
1. | Disconnect the negative(-) battery terminal. |
2. | Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") |
3. | Disconnect the VESS speaker connector (A) and then remove the VESS speaker (B) after loosening mounting bolts. |
1. | After connecting the VESS connectors, install the VESS speaker. |
2. | After connecting the horn connectors, install both high-pitch and low-pitch horns. |
3. | Install the front bumper cover. |
4. | Connect the negative (-) battery terminal. |
Other information:
Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the front wheel and tire (A) from the front hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
Be careful not to damage the hub bolts when removing the front wheel and tire...
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse...
Categories
The seatback pocket is provided on the back of the front passenger's seatback.
WARNING
To prevent the Occupant Classification System from malfunctioning:
read more