Hyundai Ioniq: Input shaft speed sensor 1 / Components and components location

1. Input shaft speed sensor (Odd)
| 2. Input shaft speed sensor (Even)
|
Specification
Item
Specification
TypeHall effect sensorOperation condition (°C)°F-40 to 257 °F (-40 to 125 °C )Output signal (mA)High: 11...
Other information:
Removal1.Turn the ignition switch OFF and disconnect the battery negative (-) cable.2.Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly")3.Remove the fuel pump service cover (A).
•
When reinstalling a protective cover for a fuel pump, remove the existing butyl tape and apply a new one...
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. •
Use a plastic panel removal tool to remove interior trim pieces without marring the surface...
Categories

The seatback pocket is provided on the back of the front passenger's seatback.
WARNING
To prevent the Occupant Classification System from malfunctioning:
read more