Hyundai Ioniq: Rear Seat / Rear Seat Assembly. Repair procedures
[Rear seat cushion assembly]
1. | Loosen the mounting bolts, remove the rear seat cushion assembly (A). 
|
2. | Disconnect the rear seat cushion extension connector (A). 
|
3. | To install, reverse the removal procedure. |
[Rear seat back assembly]
1. | Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly") |
2. | Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow. 

|
3. | After loosening the mounting bolts, remove the rear seat assembly (A). Tightening torque : 16.7 - 25.5 N.m (1.7 - 2.6 kgf.m, 12.3 - 18.8 lb-ft) |

|
4. | To install, reverse the removal procedure. |
Other information:
There is a wireless cellular phone charger inside the front console.
The system is available when all doors are closed, and when the Engine Start/Stop
button is in the ACC/ON/START position.
To charge a cellular phone
The wireless cellular phone charging system charges only the Qi-enabled cellular
phones ()...
Check the target charging voltage when replacing with a new module Fault Code1.Turn OFF the ignition switch.2.Connect the diagnostic tool device to the self-diagnosis connector (DLC).3.Turn ON the ignition switch.4.Check the "Fault Code" in the diagnostic tool fault diagnosis...
Categories

The Driver Position Memory System is provided to store and recall the following
memory settings with a simple button operation.
- Driver's seat position
- Side view mirror position
- Instrument panel illumination intensity
read more