Hyundai Ioniq: Towing / Removable Towing Hook
1. Open the liftgate, and take the towing hooks out from the tool case.
■ Front
■ Rear
2. Remove the hole cover by pressing the lower part of the cover on the front
or rear bumper.
3. Install the towing hook by turning it clockwise into the hole until it is
fully secured.
4. Remove the towing hook and install the cover after use.
Towing Service
If emergency towing is necessary, we recommend having it done by an authorized
HYUNDAI dealer or a commercial tow-truck service.
Proper lifting and towing procedures are necessary to prevent damage to the vehicle...
■ Front
■ Rear
If towing is necessary, we recommend you to have it done by an authorized HYUNDAI
dealer or a commercial tow truck service.
If a towing service is not available in an emergency, your vehicle may be temporarily
towed using a cable or chain secured to the emergency towing hook at the rear of
the vehicle...
Other information:
DescriptionThe Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power circuit between the high voltage battery and inverter by the control signal of BMS ECU...
Components Location[Fuel Tank]1. Fuel tank2. Fuel pump3. Fuel filter4. Fuel pressure regulator5. Canister6. Fuel tank air Filter7. Fuel pressure sensor (FPS)8. Fuel level sensor (FLS)9. Fuel Filler hose10. Leveling hose11. Vent hose12. Vapor tube13. Fuel pump plate cover[High Pressure Fuel Line]1...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment
read more