| Specifications |
|
Items
|
Specifications
| |
| Clutch operation method | Hydraulic motor type | |
| Clutch cover | Type | Diaphragm spring strap |
| Clutch disc | Type | Single dry with diaphragm |
| Faling diameter (Outer × inner) | Ø225 × Ø175mm (Ø8.8582 × Ø6.8897 in.) | |
| Clutch disc thickness [When free] | 6.4 ± 0.2 mm (0.2519 ± 0.0078 in.) | |
|
Items
|
Specifications
|
| Operation method | BLDC Motor |
| Input voltage (V) | 12 |
| Max power (W) | 480 |
| Operating temperature (°C) | - 30 to 105 °C |
| Resistance (Ω) | 120 |
| Max pressure | 43 barz |
| Service Standard |
|
Items
|
Specifications
|
| Clutch disc rivet depth | 0.3 mm (0.0118 in.) less than |
| Tightening Torques |
|
Item
|
N.m
|
kgf.m
|
lb-ft
|
| Clutch cover assembly mounting bolt | 11.8 - 14.7 | 1.2 - 1.5 | 8.7 - 10.8 |
| Engine clutch actuator mounting bolt | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Concentric slave cylinder mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Hydraulic pipe bracket mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
| Reservoir mounting bolt | 21.6 - 26.5 | 2.2 - 2.7 | 15.9 - 19.5 |
| Lubricants |
|
Items
|
Specified lubricants
|
Quantity
|
| Hybrid motor input shaft spline side | CASMOLY L9508 | 0.2g |
| Engine clutch actuator reservoir | Brake fluid DOT 3 or DOT 4 | Remove air from the hydraulic line and then inject hydraulic fluid to the reservoir so that it comes between the MAX and MIN levels of the reservoir. |
DescriptionTransmits or blocks the driving power of the engine when switching between the EV and HEV modes.
Special Service Tools Tool (Number and name) Illustration Use Clutch disc guide & adapterA: 09411-1P000 B: 09411-G2100Installation of the clutch disc.
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
DescriptionIn ordinary cars, the mechanical water pump mounted on the engine for heating purposes is activated to circulate the cooling water, but in hybrid cars, AEWP is used to circulate the cooling water when the engine is not operating. Classification System Cooling water used