Hyundai Ioniq (AE): Hybrid System Overview / Driving the Hybrid/Plug-in Hybrid Vehicle
- Starting the Vehicle
- Special Features
- Hybrid System Gauge
- Plug-in Hybrid Mode (Plug-in hybrid vehicle)
- AVN Screen (Plug-in hybrid vehicle)
- Aux. Battery Saver+ (Plug-in hybrid vehicle)
- Warning and Indicator Lights
- LCD Display Messages
- Energy flow
Unlock Charging Connector in Emergency If the charging connector does not disconnect due to battery discharge and failure of the electric wires, open the hood and slightly pull the emergency cable.
1. Carry the smart key or leave it inside the vehicle. 2. Make sure the parking brake is firmly applied. 3. Place the shift lever in P (Park). With the shift lever in N (Neutral), you cannot start the vehicle.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Repair procedures
- Brake System
- Jump starting procedure
- New on site
- Most important about car
