Hyundai Ioniq: Exhaust Emission Control System / GPF (Gasoline Particulate Filter). Schematic diagrams
DescriptionThe Gasoline Particulate Filter (GPF) system prevents Particulate Matter (PM) from being discharged to the atmosphere and consists of a filter assembly, two Exhaust Gas Temperature Sensors (EGTS)...
GPF RegenerationThis procedures is to forcibly regenerate the GPF with scan tool when the GPF doesn't have been regenerated during driving. For example, if the vehicle has repeated "Low speed driving" or "Short distance driving", the GPF regeneration procedure cannot be proceeded because "Regeneration Mode" doesn't made...
Other information:
Removal and Installation1.Remove the drive belt.(Refer to Timing System - "Drive Belt")2.Remove the idler (A). Tightening torque : 39.2 - 49.0 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb-ft)3.Install in the reverse order of removal.InspectionCheck the idler for excessive oil leakage, abnormal rotation or vibration...
Removal1.Disconnect the negative (-) battery terminal.2.Remove the driver seat assembly.(Refer to Body - "Front Seat Assembly")3.Loosening the IMS unit mounting screws.4.Disconnect the IMS module connectors (B) and then remove the IMS unit (A).Installation1...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment
read more