Hyundai Ioniq (AE): Injector / Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.425 - 1.575 [20°C (68°F)]

    DescriptionThe GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits the nozzle.

    Signal WaveformThe three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low side of the #4 injector.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Core. Repair procedures

    Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Components and components location

    C

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.018