Hyundai Ioniq: Front Seat / Front Seat Back Cover. Components and components location

Front Seat Shield Inner Cover. Repair procedures

Replacement    • Put on gloves to prevent hand injuries.    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Front Seat Back Cover. Repair procedures

Replacement    • Put on gloves to prevent hand injuries.    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Other information:

Hyundai Ioniq (AE) 2017-2024 Service Manual: BJ Boot. Repair procedures

Replacement1.Remove the front driveshaft. (Refer to Driveshaft Assembly - "Front Driveshaft")2.Remove the TJ joint assembly. (Refer to Driveshaft Assembly - "TJ Joint")3.Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A). 4.Using the SST, secure the BJ boot bands...

Hyundai Ioniq (AE) 2017-2024 Service Manual: Ambient Temperature Sensor. Description and operation

DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower motor level control, mix mode control and in-car humidity control...