Hyundai Ioniq: Hybrid Motor System / Hybrid Motor Cooling System
Inspection1.Check the temperature sensor resistance. [Hybrid drive motor] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 88kΩ (30°C / 86°F) - 20kΩ (10°C / 50°F)10 - 30°C / 50 - 86°F [Hybrid starter generator (HSG)] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 9126...
Description•
Various devices containing semiconductor are used in HPCU.And heat is generated when the HPCU operates.•
These devices are connected to the high voltage directly and cause heat hotter than the electrical devices of an internal combustion engine...
Other information:
Replacement1.Remove the rear door trim.(Refer to Rear Door - "Rear Door Trim")2.After loosening the mounting screws, remove the rear door inside handle (A).3.To install, reverse the removal procedure.
•
Make sure the door locks / unlocks and opens / closes properly...
ESC ON condition
When the Engine Start/Stop button is in the ON position, the ESC and the ESC
OFF indicator lights illuminate for approximately three seconds. After both lights
go off, the ESC is enabled.
When operating
When the ESC is in operation, the ESC indicator light blinks:
When you apply your brakes under conditions which may lock the wheels, you
may hear sounds from the brakes, or feel a corresponding sensation in the brake
pedal...
Categories
The seatback pocket is provided on the back of the front passenger's seatback.
WARNING
To prevent the Occupant Classification System from malfunctioning:
read more