Hyundai Ioniq: Rear Suspension System / Rear Shock Absorber. Components and components location

1. Shock absorber dust cap 2. Lock nut 3. Insulator assembly
| 4. Bumper rubber 5. Dust cover 6. Shock absorber
|
Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the rear wheel and tire (A) from the rear hub...
Other information:
Removal and InstallationRoll Rod Bracket1.Remove the roll rod bracket (A). Tightening torque Bolt (B) :107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)Bolts (C) :49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb-ft)2.Remove the roll rod mounting support bracket (A)...
Inspection1.Turn the ignition switch OFF.2.Disconnect the IATS connector.3.Measure resistance between the IATS terminals 3 and 4.4.Check that the resistance is within the specification. Specification : Refer to "Specification"Removal 1.Turn ignition switch OFF and disconnect the negative (-) battery cable...
Categories

Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more