Hyundai Ioniq (AE): Heating, Ventilation and Air Conditioning / Air Conditioning System
- General safety information and caution
- Description and operation
- Repair procedures
- Components and components location
- Compressor oil. Repair procedures
- Refrigerant Line. Components and components location
- Refrigerant Line. Repair procedures
- Electric A/C Compressor
- Condenser. Components and components location
- Condenser. Repair procedures
- Receiver-Drier. Repair procedures
- A/C Pressure Transducer. Description and operation
- A/C Pressure Transducer. Repair procedures
- Evaporator Temperature Sensor. Description and operation
- Evaporator Temperature Sensor. Repair procedures
- In-car Sensor. Description and operation
- In-car Sensor. Repair procedures
- Photo Sensor. Description and operation
- Photo Sensor. Repair procedures
- Ambient Temperature Sensor. Description and operation
- Ambient Temperature Sensor. Components and components location
- Ambient Temperature Sensor. Repair procedures
- Auto Defogging Sensor. Description and operation
- Auto Defogging Sensor. Repair procedures
- Duct Sensor. Components and components location
- Duct Sensor. Repair procedures
TroubleshootingProblem Symptoms TableBefore replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor.
InstructionsWhen Handling Refrigerant1.R-134a, R-1234yf liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Body (Interior and Exterior)
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Jump Starting
- New on site
- Most important about car
